3/16″ Check Valves | #70-3201
$356.00Used for CO2 Pump.
Showing all 33 results
-
-
-
-
Back Pressure Regulator, 10K PSI | #80-0003
$1,838.0010K PSI BPR used in extraktLAB’s E-110, E-140, E-180 & pure99.
-
Bag Lifter | #90-1235
$4,200.00This is an UPGRADE ADD-ON: This bag lifter assembly is to ease the removal of extractor bags from within the tube.
Purchase Includes: Bag Lifter Assembly, assembly instructions, and an installation video.
This purchase does NOT include one of our technicians doing the installation. If you want a certified technician to complete the install, please call our service department (424.320.0123) to discuss this as a contract for labor and installation.Tools Needed
Wrenches: 9/16″(2x), 5/8″, 1/2″, 1″, crescent
Phillips Screwdriver
Allen Wrenches: 3/16 and 3/32
Side CuttersOther Supplies Needed
Thread Tape
Thread Sealant -
-
-
-
-
-
Decal Kit, Extractor | #10-1034
$151.70Includes:
ExtraktLab Decal (1)
Fuse Table Decal (1)
Burn Hazard (without Text) (3)
Burn Hazard (with Text) (1)
Emergency Stop Decal (1)
Warning High Voltage (1)
Tested For Electrical Safety (4)
ETL Label Decal (1)
Disconnect Power Before Working Decal (1)
Danger Compressed Gas Decal (1)
High Pressure Vent Before Opening Decals (2)
Foot Crush Warning Decal (1)
Body Crush Warning Decal (1)
Face Shield Decals (3)
Extractor, Collector 1, 2 & 3 (1)
3-Phase Monitor Relay (1)
Safety Gloves (2)
Pinch Point (2)
On/Off Decal (1)
Carbon Dioxide (1)
Open/Close Decal (5)
Prefill Decal (1)
Top Vent Decal (1)
Vent Decals (2)
Bypass Decals (1) -
Extractor Bags, 2.5L, 10µm, ID 3″x24″ | #70-1745
$123.70BAG, NYLON 6, 10µm, 3″ ID X 24″ LONG
Can be used for 2.5L or 5L extractor columns.
- FDA approved materials
- Reusable
- 10 Micron Mono-filament
- 24″ Length
- Fits a 3″ Diameter Tube
-
Extractor Bags, 20L, 10µm, ID 6″x20″ | #70-1222
$44.30Used for 20L extractor columns.
- FDA approved materials
- 10 Micron Monofilament
- 20″ Length
- Fits a 6″ Diameter
- 3 of these bags fill one of our 20L extraction columns
- Compatible with some bag filler systems
*This is the extractor bag we recommend for the extraktLAB 140 & extraktLAB 180. If you would rather have a replacement bag of what you originally received, it is #70-1172.
-
Extractor Bags, 20L, 10µm, ID 6″x56″ (10 pack) | #70-1172
$472.50Please Note: This product has a 10-week lead time. We recommend using product #70-1222. Price is for minimum order quantity of 10 bags.
Used for 20L extractor columns.
- FDA approved materials
- 10 Micron Mono-filament
- 56″ Length
- Fits a 6″ Diameter Tube
- Compatible with some bag filler systems
*This bag is a replacement of the bag originally sent with your equipment. We recommend using the shorter bag (#70-1222), which is compatible with some bag filler systems.
-
Extractor Bags, 5L, 10µm, ID 3″x49″ (10 pack) | #70-1221
$245.00Please Note: This product has a 10-week lead time. Price is for minimum order quantity of 10 bags.
Used for 5L extractor columns.
- FDA approved materials
- 10 Micron Monofilament
- 49″ Length
- Fits a 3″ Diameter Tube
- Compatible with some bag filler systems
-
-
Filter, Housing 7″, 10 Micron, Stainless Steel | #80-6184
$449.20Filter for Recycler Filter Housing.
-
FTG Connector, Male, 1/4″T-3/8″, MNPT |#80-2158
$19.00This fitting was typically used to interface between 3/8″ NPT threaded extractor caps and 1/4″ tubing. Most newer 140 models (~2019+) do not require this part (see speedbite fittings). Take care installing this new part. Make sure the threads are started by hand before using a wrench to tighten.
-
-
-
Kit, 140 Cleaning | #10-1027
$757.00Items Included (also sold separately):
10L Digital Cleaner Ultra Sonicator | #80-4004
Solvent Squirt Bottle | #80-9013
Spatula, High Heat | #80-9015
Spoonula | #80-9016
1″ Tube Brush | #80-9023
1/4″ Tube Brush | #80-9024
7″ Brush | #80-9055
48″L, 1/4″ NPT Thread Brush Rod | #80-9059
1/4″ Thread T-Handle | #80-9060 -
Kit, 140 Critical Spares | #10-1039
$6,593.00Items Included (some parts may also be available separately):
20L Extractor Bag, Large, 56″ | #70-1172
Back Pressure Regulator Rebuild Kit, 10K PSI | #80-0004
Teflon O-Ring, Large | #80-0227
Teflon O-Ring, Small | #80-0229
Ball Valve, 1/4″ Tube Fitting, Certified | #80-2310
122 Cast 90 Duro Clear Urethane O-Rings (4 Pack) | #80-4609
012 Cast U 90 Urethane O-Rings (4 Pack) | #80-4612
10K PSI Pressure Regulator Seal | #80-4613
Top Tubing for E-140 Extractor Column; speedbite | #90-1104
Burst Disc Assembly, 3000 PSI Low Pressure | #90-1072
Burst Disc Assembly, 5825 PSI High Pressure | #90-1073
Adjustable Compartment Box, 3 1/2″ x 13″ | #80-9044 -
Kit, Self Flush Seal Wash | #70-3220
$592.00Stainless Steel Self-flush Kit for PR300 Pumps. Self-flush body, inlet and outlet flush check valves, seal, o-ring, and installation instructions. Also contains bushing and plug for conversion to no-flush.
1 self-flush kit per pump; 2 kits required for dual-head pumps.
-
-
-
O-Rings, 3″, Peroxide Cured (25 Pack) | #80-0221
$48.003″ Peroxcide Cured O-Rings for Extractor and 2.5L and 5L Columns. Quantity of 25.
Peroxide cured O-rings will not provide any false positives on pesticide testing that uses sulfur content to evaluate concentration.
-
-
Post Heater | #91-1085
$1,283.002000W Heat Rod, 230V
This component is used after the CO2 Recycler to expand the CO2 gas for recirculation into the extractor.
-
Pressure Transducer | #80-0049
$257.00Pressure Transducer used to sense pressures on all extractor models.
-
-
-
Top Tubing for E-140 Extractor Column; Speedbite | #90-1104
$212.30This part contains the assembly connecting the top of the extractor column to the bulkhead on the extractor unit. This is only for late-model 140 units with speedbite fittings on the vessels. Speedbite fittings are gray and do not require thread tape.
-
Union fitting, 1/4″, Swagelok | #80-2109
$20.00This fitting is used for connecting two sections of 1/4″ OD swagelok tubing.
