10L Sonicator (EU Plug) | #80-0826
$539.0010L Ultrasonic Cleaner with EU plug, 50Hz
No products in the cart.
Showing all 26 results
10K PSI?BPR used in extraktLAB’s E-110, E-140, E-180 & pure99.
CO2 connection kit allows up to 6 CO2 tanks to be used in conjunction to feed a 110 or 140 extractor. This manifold is also expandable, allowing a user to customize their CO2 delivery system.
Includes:
ExtraktLab Decal (1)
Fuse Table Decal (1)
Burn Hazard (without Text) (3)
Burn Hazard (with Text) (1)
Emergency Stop Decal (1)
Warning High Voltage (1)
Tested For Electrical Safety (4)
ETL Label Decal (1)
Disconnect Power Before Working Decal (1)
Danger Compressed Gas Decal (1)
High Pressure Vent Before Opening Decals (2)
Foot Crush Warning Decal (1)
Body Crush Warning Decal (1)
Face Shield Decals (3)
Extractor, Collector 1, 2 & 3 (1)
3-Phase Monitor Relay (1)
Safety Gloves (2)
Pinch Point (2)
On/Off Decal (1)
Carbon Dioxide (1)
Open/Close Decal (5)
Prefill Decal (1)
Top Vent Decal (1)
Vent Decals (2)
Bypass Decals (1)
Can be used for 2.5L or 5L extractor columns.
Used for 5L extractor columns.
Food Grade
10 Micron Mono-filament
49″ Length
Fits a 3″ Diameter Tube
Filter for Recycler Filter Housing.
Items Included (also sold separately):
10L Digital Cleaner Ultra Sonicator | #80-4004
Solvent Squirt Bottle | #80-9013
Spatula, High Heat | #80-9015
Spoonula | #80-9016
1″ Tube Brush | #80-9023
1/4″ Tube Brush | #80-9024
3″ Tube Brush | #80-9022
48″L, 1/4″ NPT Thread Brush Rod | #80-9059
1/4″ Thread T-Handle | #80-9060
Used for 5L Extractor.
Items Included (some parts may also be available separately):
5L Extractor Bag, 3″ x 49″ | #70-1057
3/16″ Check Valve Capsule, HF 300 Pump (4 Pack) | #70-3201
3/8″ Aqueous Seal, HP 300 for SSI Pump (4 Pack) | #70-3202
2 Micron Outlet Filter | #70-3204
BPR Rebuild Kit (Pack of 2) | #80-0004
3K PSI Burst Disc & Holder, Low Pressure | #90-1072
5825 PSI Burst Disc & Holder, High Pressure | #90-1073
LTeflon O-Rings, arge (4 Pack) | #80-0227
Teflon O-Rings, Small (4 Pack) | #80-0229
1/4″ Ball Valve tube Fitting | #80-2310
122 Cast Urethane O-Rings (4 Pack) | #80-46
012 Cast Urethane O-Rings (4 Pack) | #80-46
10K PSI Pressure Regulator | #80-4613
7″ 10 Micron Filter | #80-6184
Extractor Column Tube Top | #80-9121
10A Fuse | #80-6051
Adjustable Compartment Box | #80-9044
Items Included (also available individually):
Face Shield | #80-0059
Headgear | #80-0137
Stainless Steel Self-flush Kit for PR300 Pumps. Self-flush body, inlet and outlet flush check valves, seal, o-ring, and installation instructions. Also contains bushing and plug for conversion to no-flush.
1 self-flush kit per pump; 2 kits required for dual-head pumps.
General purpose syringe for transfer or pump priming (Extrakt 110/110+, Pure 99).
Pressure Transducer used to sense pressures on all extractor models.
This fitting is used for connecting two sections of 1/4″ OD swagelok tubing.