1/2″ Ball Valve | #80-2382
$400.001/2″ Ball valve, for V7, V94, and heat exchanger valve replacement.
Showing all 94 results
-
-
1/4″ Bulkhead | #80-2110
$27.001/4″ bulkhead fitting. 1/4″ Swagelok compression fittings on each end.
-
-
1/4″ Nut, Speedbite | #80-6186
$14.00Speedbite nut for 1/4″ SS tubing. Requires P/N 80-6185 for complete fitting assembly.
-
2 1/2″ Vacuum Head | #80-0010
$10.002-1/2″ Vacuum Head, also called a flared snorkel end, is used for terpene traps and collection exhausts.
-
-
-
-
-
-
Back Pressure Regulator, 10K PSI | #80-0003
$1,575.0010K PSI BPR used in extraktLAB’s E-110, E-140, E-180 & pure99.
-
Back-Up Ring, Small, Teflon, PTFE | #80-0229
$1.00Small teflon backup o-rings for all Back Pressure Regulators. Commonly used in conjunction with small BPR o-rings (P/N 80-4612).
-
Back-up Rings, Large, Teflon, PTFE | #80-0227
$2.00Large teflon back-up o-rings for all Back Pressure Regulators. Commonly used in conjunction with 80-4609.
-
-
-
Brush Head, 7″ | #80-9055
$19.00BRUSH HEAD ONLY
Product images show brush head attached to two different handles, sold separately.
7″ T-handle | #80-9060
48″ Rod | #80-9059 -
-
-
Burst Disc Assembly, 2300 psi, Continental | #90-1072
$450.00Continental brand Burst Disc assembly for low pressure sections (2,300 PSI).
-
-
Burst Disc Assembly, 5825 psi, Continental | #90-1073
$492.00Continental brand Burst Disc assembly for high pressure sections (5,825 psi).
-
-
-
-
-
-
-
-
CO2 Connection Kit | #10-1010
$3,300.00CO2 connection kit allows up to 6 CO2 tanks to be used in conjunction to feed a 110 or 140 extractor. This manifold is also expandable, allowing a user to customize their CO2 delivery system.
-
-
-
Connection Sleeve, 1/4″, Speedbite | #80-6185
$9.00Speedbite connection sleeve for 1/4″ SS tubing. P/N 80-6186 also required for complete fitting assembly.
-
-
-
Ferrule, 1/2″, Speedbite | #80-6344
$14.001/2″ Speedbite ferrule for 1/2″ SS tubing. Requires P/N 80-6346 for complete assembly.
-
-
-
FTG Connector, Male, 1/4″ Tube fitting x 1/4″ MNPT | #80-2121
$12.00FTG Connector, Male 1/4″T – 1/4″MNPT
-
FTG Connector, Male, 1/4″T-3/8″, MNPT |#80-2158
$16.00This fitting was typically used to interface between 3/8″ NPT threaded extractor caps and 1/4″ tubing. Most newer 140 models (~2019+) do not require this part (see speedbite fittings). Take care installing this new part. Make sure the threads are started by hand before using a wrench to tighten.
-
-
-
-
-
-
-
-
-
-
-
-
Gauge, 10K PSI | #80-2150
$118.00 – $382.0010K PSI gauge used for extraction columns and all back pressure regulators.
Select options This product has multiple variants. The options may be chosen on the product page -
-
Kit, clearSTILL Critical Spares | #10-1057
$3,116.00Items Included (some parts may also be available separately):
Washer, Lock M6, 316SS, Nord-Lock (qty10)| #50-0499
Retaining Ring, External, 15/32 OD Black | #50-0501
Washer, Sealing, Copper M6 | #50-0509
Washer, Sealing, Copper M10 | #50-0514
Washer, Sealing, Copper M8 | #50-0527
Set Screw, 1/4″-20 Thread x 3/16″ long | #50-0566
Wiping Element Holder (qty18) | #70-1382
Rounded Machine Key, .125″x.125″x.75″ | #70-1410
Blade, Wiper Element, Wiped Film (qty9) | #70-1585
Bushing, Wiper Column, 8mm long (qty2) | #70-1586
Bushing, Wiper Column, 16mm long | #70-1587
Ring, Centering, KF25| #70-3029
Ring, Centering, KF40| #80-0394
Ring, Centering, KF16| #80-0403
Gasket, 6″ Tri-Clamp Flanged Viton | #80-0471
Gasket, 2″ Tri-Clamp Flanged Viton | #80-0484
Gasket, DIN 10 Sanitary, Flanged, EPDM | #80-0519
Ring, Centering, KF50, Viton | #80-0557
Ball Bearing, Trade Number 6202, 15mm SH | #80-0562
O-Ring, 5 1/2″ x 5 1/8″ x 3/16″ | #80-0569
O-Ring, 5″ x 4 5/8″ x 3/16″ | #80-0570
Ball Bearing, Trade Number 6201, 12mm SH | #80-0573
O-Ring, 35mm ID x 39mmOD x 2mm, Viton | #80-0605
Gear Pump, Metering 0.6CC/Rev, SS | #80-0717
Seal, Dual Lip Rotary Shaft, 15mm | #80-0736
Cap, Push On, 3/8″ tube x 3/4″, Vinyl PL (qty3) | #80-0737
FTG Bulkhead 3/8″T (qty2)| #80-2168
Cap, 3/8″ Tube (qty6) | #80-2259
Plug, 3/8″ Tube Fitting (qty6) | #80-2260
Plug, 5/16 Tube Fitting (qty6) | #80-2408
Compartment Box, Adjustable 3 1/2″ x 13″ (qty2) | #80-9044
Shaft Key, 1/8″ x 1/8″ x 3/4″, 18-8SS | #80-9525 -
Kit, fracTron Critical Spares | #10-1064
$1,134.00Items Included (some parts may also be available separately):
Gasket, 3/4″ Tri-Clamp Flanged, Viton | #80-0725
Gasket, 1.5″ Tri-Clamp Flanged, Viton | #80-0472
Gasket, 2″ Tri-Clamp Flanged, Viton | #80-0484
Gasket, 4″ Tri-Clamp Flanged, Viton | #80-0486
Gasket, 6″ Tri-Clamp Flanged, Viton | #80-0471
Gasket, 8″ Tri-Clamp Flanged, Viton | #80-0626
O-Ring, 7/8″ OD x 11/16″ ID x 3/32″ W | #80-0524
O-Ring, 19mm ID x 22mm OD x 1.5mm W | #80-0533
O-Ring, 3″ x 3 1/4″, Viton | #80-0659
O-Ring, 9/16″OD x 3/8″ID x 3/32″W | #80-0665
O-Ring, | #80-0821
O-Ring, | #80-0823
O-Ring, | #80-0824
O-Ring, | #80-0825
Spring, Wave | #80-0822
Adjustable Compartment Box, 3 1/2″ x 13″ | #80-9044 -
-
-
Nut, 1/2″, Speedbite | #80-6346
$32.001/2″ Speedbite nut for 1/2″ SS tubing. Requires P/N 80-6344 for complete assembly.
-
-
O-Ring, CO2 Inlet-Filter Housing, Teflon | #80-0411
$253.00Teflon replacement O-rings (2) for extraktLAB’s supercritical CO2 extractor.
-
O-Ring, CO2 Inlet-Filter Housing, Viton | #80-0410
$54.60Viton replacement O-Ring for extraktLAB’s supercritical CO2 extractor.
-
-
-
-
-
O-Rings, 3″ Standard (25 pack) | #80-0293
$10.003″ O-rings for 5 L and 2.5 L vessels.
These O-rings have been sulfur cured, which can create false positives on pesticide testing that uses sulfur content to evaluate concentration.
-
O-Rings, 3″, Peroxide Cured (25 Pack) | #80-0221
$41.003″ Peroxcide Cured O-Rings for Extractor and 2.5L and 5L Columns. Quantity of 25.
Peroxide cured O-rings will not provide any false positives on pesticide testing that uses sulfur content to evaluate concentration.
-
O-Rings, 5″ Standard (25 pack) | #80-4651
$20.005″ O-rings for 20 L vessels.
These O-Rings have been sulfur cured, which can create false positives on pesticide testing that uses sulfur content to evaluate concentration.
-
O-Rings, 5″, Peroxide Cured (25 Pack) | #80-0222
$103.005″ peroxide cured O-rings for 20 L vessels.
Peroxide cured O-rings will not provide any false positives on pesticide testing that uses sulfur content to evaluate concentration. -
-
Pre/Post Heater Thermocouple | #80-0069
$18.00Thermocouple used in the pre and post heater. End of thermocouple ends in mounting bracket.
-
-
-
-
-
-
-
Rebuild Kit for 1/4″ SK Ball Valve | #80-2339
$111.00Repair kit to repair a single 1/4″ SK Ball Valve
-
-
-
-
Rod, 48″ Long Brush | #80-9059
$10.0048″ ROD ONLY for 1/4″ NPT thread.
Product images also show an example with 7″ brush head attached, sold separately.
7″ Brush Head | #80-9055 -
-
-
Set Screw for 1/4″ pneumatic valves | #80-2332
$7.001 set screw for chuck and valve stem on the 1/4″ pneumatic ball valve.
-
Silicone Heater (2500W) for 20L Tanks | #70-1141
$225.00Silicone heater, 2500W for 20L vessels. (240v)
-
Silicone Heater for 2.5L (Collector) Tanks | #70-1011
$70.00Silicone heater, 240v for 2.5L (collector) vessels.
-
Spare Gasket Kit, EPDM | #10-1032
$107.00Spare gasket set for the DrainDroyd Filtration System contains peroxide cured, EPDM gaskets for all lower collection system components.
Contains (also available individually):
2″ Gasket, set of 2 | #80-0281
3″ Gasket | #80-0280
10″ Gasket | #80-0242 -
T-Handle, 7″ Brush | #80-9060
$18.007″ WOOD T-HANDLE ONLY
Product images also show an example with 7″ brush head attached, sold separately.
7″ Brush Head | #80-9055 -
Thermal Kill Switch | #80-0079
$8.00Thermal Kill Switch for Pre- and Post- Heaters. Not to be used on extraction or collection column heaters.
-
Tube Adapter, 120″ hose, 1/2″ OD | #80-2300
$391.00This flexible hose is 10 feet long and has 1/2″ OD tube adapters for ends. The maximum working pressure of this hose is 1800 PSI.
-
Union fitting, 1/4″, Swagelok | #80-2109
$17.00This fitting is used for connecting two sections of 1/4″ OD swagelok tubing.
-
Valve Guide for LEWA Check Valve | #70-3326
$354.00This valve guide is the “cage” part of the LEWA check valve that goes on top of the ball when installing the check valve. It is ported to allow flow around the ball in the direction of flow. PN-70-3326.
-
Washer, Lifter Plate, Plastic | #70-2051
$11.00Plastic washer to prevent wear on head surface when using lifter plate.
-
