Gasket, DIN 10 | #80-0519
$4.50Replacement Gasket for Gear Pump, DIN 10 Sanitary, Flanged, EPDM
No products in the cart.
Showing 101–190 of 190 results
10K PSI gauge used for extraction columns and all back pressure regulators.
High vacuum grease is essential to obtaining a low vacuum for fast filtration. Apply liberally to all gaskets.
Items Included (also sold separately):
10L Digital Cleaner Ultra Sonicator | #80-4004
Solvent Squirt Bottle | #80-9013
Spatula, High Heat | #80-9015
Spoonula | #80-9016
1″ Tube Brush | #80-9023
1/4″ Tube Brush | #80-9024
3″ Tube Brush | #80-9022
48″L, 1/4″ NPT Thread Brush Rod | #80-9059
1/4″ Thread T-Handle | #80-9060
Used for 5L Extractor.
Items Included (some parts may also be available separately):
5L Extractor Bag, 3″ x 49″ | #70-1057
3/16″ Check Valve Capsule, HF 300 Pump (4 Pack) | #70-3201
3/8″ Aqueous Seal, HP 300 for SSI Pump (4 Pack) | #70-3202
2 Micron Outlet Filter | #70-3204
BPR Rebuild Kit (Pack of 2) | #80-0004
3K PSI Burst Disc & Holder, Low Pressure | #90-1072
5825 PSI Burst Disc & Holder, High Pressure | #90-1073
LTeflon O-Rings, arge (4 Pack) | #80-0227
Teflon O-Rings, Small (4 Pack) | #80-0229
1/4″ Ball Valve tube Fitting | #80-2310
122 Cast Urethane O-Rings (4 Pack) | #80-46
012 Cast Urethane O-Rings (4 Pack) | #80-46
10K PSI Pressure Regulator | #80-4613
7″ 10 Micron Filter | #80-6184
Extractor Column Tube Top | #80-9121
10A Fuse | #80-6051
Adjustable Compartment Box | #80-9044
Items Included (also sold separately):
10L Digital Cleaner Ultra Sonicator | #80-4004
Solvent Squirt Bottle | #80-9013
Spatula, High Heat | #80-9015
Spoonula | #80-9016
1″ Tube Brush | #80-9023
1/4″ Tube Brush | #80-9024
7″ Brush | #80-9055
48″L, 1/4″ NPT Thread Brush Rod | #80-9059
1/4″ Thread T-Handle | #80-9060
Items Included (some parts may also be available separately):
20L Extractor Bag, Large, 56″ | #70-1172
Back Pressure Regulator Rebuild Kit, 10K PSI | #80-0004
Teflon O-Ring, Large | #80-0227
Teflon O-Ring, Small | #80-0229
Ball Valve, 1/4″ Tube Fitting, Certified | #80-2310
122 Cast 90 Duro Clear Urethane O-Rings (4 Pack) | #80-4609
012 Cast U 90 Urethane O-Rings (4 Pack) | #80-4612
10K PSI Pressure Regulator Seal | #80-4613
Top Tubing for E-140 Extractor Column; speedbite | #90-1104
Burst Disc Assembly, 3000 PSI Low Pressure | #90-1072
Burst Disc Assembly, 5825 PSI High Pressure | #90-1073
Adjustable Compartment Box, 3 1/2″ x 13″ | #80-9044
Consumables required for HPLC analysis. All consumables you need to start ultra-fast potency analysis! Includes solvents, transfer pipettes, sample tubes, pipette tips, and HPLC vials.
Items Included (some parts may also be available separately):
Washer, Lock M6, 316SS, Nord-Lock (qty10)| #50-0499
Retaining Ring, External, 15/32 OD Black | #50-0501
Washer, Sealing, Copper M6 | #50-0509
Washer, Sealing, Copper M10 | #50-0514
Washer, Sealing, Copper M8 | #50-0527
Set Screw, 1/4″-20 Thread x 3/16″ long | #50-0566
Wiping Element Holder (qty18) | #70-1382
Rounded Machine Key, .125″x.125″x.75″ | #70-1410
Blade, Wiper Element, Wiped Film (qty9) | #70-1585
Bushing, Wiper Column, 8mm long (qty2) | #70-1586
Bushing, Wiper Column, 16mm long | #70-1587
Ring, Centering, KF25| #70-3029
Ring, Centering, KF40| #80-0394
Ring, Centering, KF16| #80-0403
Gasket, 6″ Tri-Clamp Flanged Viton | #80-0471
Gasket, 2″ Tri-Clamp Flanged Viton | #80-0484
Gasket, DIN 10 Sanitary, Flanged, EPDM | #80-0519
Ring, Centering, KF50, Viton | #80-0557
Ball Bearing, Trade Number 6202, 15mm SH | #80-0562
O-Ring, 5 1/2″ x 5 1/8″ x 3/16″ | #80-0569
O-Ring, 5″ x 4 5/8″ x 3/16″ | #80-0570
Ball Bearing, Trade Number 6201, 12mm SH | #80-0573
O-Ring, 35mm ID x 39mmOD x 2mm, Viton | #80-0605
Gear Pump, Metering 0.6CC/Rev, SS | #80-0717
Seal, Dual Lip Rotary Shaft, 15mm | #80-0736
Cap, Push On, 3/8″ tube x 3/4″, Vinyl PL (qty3) | #80-0737
FTG Bulkhead 3/8″T (qty2)| #80-2168
Cap, 3/8″ Tube (qty6) | #80-2259
Plug, 3/8″ Tube Fitting (qty6) | #80-2260
Plug, 5/16 Tube Fitting (qty6) | #80-2408
Compartment Box, Adjustable 3 1/2″ x 13″ (qty2) | #80-9044
Shaft Key, 1/8″ x 1/8″ x 3/4″, 18-8SS | #80-9525
Items Included:
Priming Syringe
Priming Instructions
2.5 gallon F-Style Polyethylene Tank & Cap
HF 300 SSI Pump
3/8″ Aqueous Seals (2 Pack)
2 Micron Replacement Filter
Transceiver Adapter
Items Included (some parts may also be available separately):
Gasket, 3/4″ Tri-Clamp Flanged, Viton | #80-0725
Gasket, 1.5″ Tri-Clamp Flanged, Viton | #80-0472
Gasket, 2″ Tri-Clamp Flanged, Viton | #80-0484
Gasket, 4″ Tri-Clamp Flanged, Viton | #80-0486
Gasket, 6″ Tri-Clamp Flanged, Viton | #80-0471
Gasket, 8″ Tri-Clamp Flanged, Viton | #80-0626
O-Ring, 7/8″ OD x 11/16″ ID x 3/32″ W | #80-0524
O-Ring, 19mm ID x 22mm OD x 1.5mm W | #80-0533
O-Ring, 3″ x 3 1/4″, Viton | #80-0659
O-Ring, 9/16″OD x 3/8″ID x 3/32″W | #80-0665
O-Ring, | #80-0821
O-Ring, | #80-0823
O-Ring, | #80-0824
O-Ring, | #80-0825
Spring, Wave | #80-0822
Adjustable Compartment Box, 3 1/2″ x 13″ | #80-9044
Items Included (also available individually):
Face Shield | #80-0059
Headgear | #80-0137
Stainless Steel Self-flush Kit for PR300 Pumps. Self-flush body, inlet and outlet flush check valves, seal, o-ring, and installation instructions. Also contains bushing and plug for conversion to no-flush.
1 self-flush kit per pump; 2 kits required for dual-head pumps.
1 Roll
Roll of labels for igwLAB printer. (Printer not included.)
For use with:
Printer #80-7024
Barcode Scanner #80-7006
1/2″ Speedbite nut for 1/2″ SS tubing. Requires P/N 80-6344 for complete assembly.
Teflon replacement O-rings (2) for extraktLAB’s supercritical CO2 extractor.
Viton replacement O-Ring for extraktLAB’s supercritical CO2 extractor.
3″ O-rings for 5 L and 2.5 L vessels.
These O-rings have been sulfur cured, which can create false positives on pesticide testing that uses sulfur content to evaluate concentration.
3″ Peroxcide Cured O-Rings for Extractor and 2.5L and 5L Columns. Quantity of 25.
Peroxide cured O-rings will not provide any false positives on pesticide testing that uses sulfur content to evaluate concentration.
5″ O-rings for 20 L vessels.
These O-Rings have been sulfur cured, which can create false positives on pesticide testing that uses sulfur content to evaluate concentration.
5″ peroxide cured O-rings for 20 L vessels.
General purpose syringe for transfer or pump priming (Extrakt 110/110+, Pure 99).
2000W Heat Rod, 230V
This component is used after the CO2 Recycler to expand the CO2 gas for recirculation into the extractor.
Thermocouple used in the pre and post heater. End of thermocouple ends in mounting bracket.
Pressure Transducer used to sense pressures on all extractor models.
Printer for igwLAB; labels not included.
Sold Separately:
Barcode Scanner #80-7006
Labels #80-6153
Repair kit to repair a single 1/4″ SK Ball Valve
Replacement wiper for French Press Lid accessory.
Retaining clip to hold mesh screens in extractor column heads.
48″ ROD ONLY for 1/4″ NPT thread.
Product images also show an example with 7″ brush head attached, sold separately.
7″ Brush Head | #80-9055
Barcode Scanner for igwLAB.
Sold Separately:
Printer #80-7024
Labels #80-6153
1 set screw for chuck and valve stem on the 1/4″ pneumatic ball valve.
Silicone heater, 2500W for 20L vessels. (240v)
Silicone heater, 240v for 2.5L (collector) vessels.
Spare gasket set for the DrainDroyd Filtration System contains peroxide cured, EPDM gaskets for all lower collection system components.
Contains (also available individually):
2″ Gasket, set of 2 | #80-0281
3″ Gasket | #80-0280
10″ Gasket | #80-0242
7″ WOOD T-HANDLE ONLY
Product images also show an example with 7″ brush head attached, sold separately.
7″ Brush Head | #80-9055
Thermal Kill Switch for Pre- and Post- Heaters. Not to be used on extraction or collection column heaters.
This part contains the assembly connecting the top of the extractor column to the bulkhead on the extractor unit. This is only for late-model 140 units with speedbite fittings on the vessels. Speedbite fittings are gray and do not require thread tape.
This flexible hose is 10 feet long and has 1/2″ OD tube adapters for ends. The maximum working pressure of this hose is 1800 PSI.
This fitting is used for connecting two sections of 1/2″ OD swagelok tubing.
This fitting is used for connecting two sections of 1/4″ OD swagelok tubing.
Custom stainless steel divided, non-stackable pan for the Across International AT75a oven (#80-4005).
Custom stainless steel divided, non-stackable pan. Fits oven #80-4411.
This valve guide is the “cage” part of the LEWA check valve that goes on top of the ball when installing the check valve. It is ported to allow flow around the ball in the direction of flow. PN-70-3326.
Plastic washer to prevent wear on head surface when using lifter plate.